There are many precautions for the use of belt conveyors. If you don't understand these things, it will cause operational errors. Let us take a look at the related matters and precautions of the belt conveyor.

First of all, the belt conveyor should be started without load. Feeding can only be carried out after normal operation. Driving is prohibited after feeding. If there are several conveyors running in series, they should be started sequentially from the discharge end. After normal operation, you can feed. If the belt is found to be off-track during operation, stop and adjust it. Do not use it reluctantly to avoid abrasion of the edges and increase the load. The working environment of the belt conveyor and the temperature of the conveyed materials shall not be higher than 50 degrees and lower than -10 degrees. Pedestrians or passengers are prohibited from walking on the belt conveyor. Secondly, the belt conveyor plays an indispensable role in the production line. The correct installation of the belt conveyor and its auxiliary equipment accessories is the basis to ensure the normal operation of the equipment and can also reduce the failure rate. There must be no obstacles near the braking device and emergency stop switch. Regularly check the reliability of these devices. Before finding out the cause of the stop and troubleshooting, the conveyor that has stopped due to an accident shall not be restarted. Mechanical and electrical adjustments should be made by approved personnel at designated times. The removal and repair of the protective cover and baffle can only be carried out when the conveyor is stopped and cannot be started. The conveyor can be used again only after the person in charge reinstalls and orders the protective cover. The choice of power cannot be too small, otherwise insufficient power support will cause the belt conveyor to be damaged due to insulation heating. Too much power selection will result in excessive output of the belt conveyor, resulting in waste of electric energy. Try to use those short-term quotas when choosing. The main advantage is that not only the price is lower, but also because of the low quality, the transportation is more convenient. The power of the belt conveyor should be selected according to the power required by the production machinery, and the equipment should be operated under the rated load as much as possible.